 |
| Africa Studio / Shutterstock |
When it comes to cleaning rugs properly, you need to know which products you can use and which you can't, so you don't make the mistake of causing any irreparable damage to your rugs. Therefore, if you want to get rid of doubts, in this guide we tell you what products to clean the carpets you need.
The Necessity
Cleaning the carpets is something necessary and that you can do yourself at home. How often? It depends on the type of carpet or how much you use it. In general, a deep cleaning is recommended every 6 months or every year so that they are well maintained, and you get them to last much longer in optimal conditions. However, it is essential to clean stains on the spot (as soon as they occur) and vacuum every week, to prevent dust from accumulating and damaging the carpets. Now, let's see what products you should use:
Salt
Is it advisable to use salt to clean the carpets? The truth is that salt is used to disinfect carpets, to remove the difficult-to-remove stains that remain on them. How is it used? You just have to sprinkle a little salt on top of the rug, roll up the mat and let it sit for a couple of hours. You should then unroll and vacuum to remove the debris.
Peroxide
Another product that you can use to clean carpets, strange as it may seem, is hydrogen peroxide. Or, you could opt for sparkling water, if that fails. How does it apply? Put hydrogen peroxide on the stain if it is still damp and let it work without rubbing. Then, you should blot it with an absorbent kitchen towel or use a rag on top of the stain.
White Vinegar
White vinegar is another great product when cleaning carpets naturally without chemicals. Although it has a certain smell that for some people can be unpleasant when it dries it no longer smells. Apply diluted with water on the stain and wait for it to dry.
Ammonia
Another of the most used products to clean carpets is ammonia. Therefore, if you have a little around the house, it can make your rugs look perfect very quickly. How is it used? Dilute a little in hot water and apply it on top of the carpet with a steamer. Its smell will disappear very soon after.
Talcum powder
The talcum powder is also ideal for cleaning grease stains or oil. Adding it in immediately after pouring will help the powders absorb all the dirt. Apply talcum powder liberally to the stain and allow it to dry then vacuum.
Sodium Bicarbonate
Sodium bicarbonate is an excellent product for treating oil stains and grease or remove excess dirtiness. It is also excellent for fighting odors and killing bacteria that may have accumulated on the carpet after a long time of use. How can it be used? When you have a stain of this type, the idea is to remove the stain little by little with touches of absorbent paper. Then apply a little baking soda to absorb all the liquid. When it is dry, the excess is removed with the vacuum cleaner.
Dry Sprays or Foams
In supermarkets, you will also find this type of specific product to clean carpets. They are also effective, because they clean and soften the fibers to remove stains. However, if you do not want to buy specific cleaners and prefer to clean your carpets with organic products that do not contain chemicals, you can use the above products.
Conclusion
With these products to clean the carpets, they will look great in a very short time. Remember, it is important to act quickly, as soon as the stain occurs, because the more time that passes, the more it will dry and the more difficult it will be to remove. Therefore, you need to know what to use in those cases. If you have doubts, it is best to check with the distributor or manufacturer. If you are still unsure, it is best to use carpet cleaning Denver services by a professional who knows how to get the job done the right way.
No comments:
Post a Comment